Summary Route

JAWABAN:

 1. Mengisi IP di PC0 terlebih  dahulu

2. Kemudian mengisi IP di PC1

3. Mengisi IP di PC2

4. Mengisi IP di ROUTER0 dan mengisi static route nya juga

ROUTER0

Router>enable

Router#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#interface Serial0/0/0

Router(config-if)#ip address 192.168.1.3 255.255.255.0

Router(config-if)#clock rate 64000

Router(config-if)#

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up

no shutdown

Router(config-if)#

Router(config-if)#exit

Router(config)#interface Serial0/0/1

Router(config-if)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up

Router(config-if)#ip address 172.16.2.2 255.255.255.0

Router(config-if)#clock rate 64000

Router(config-if)#no shutdown

Router(config-if)#

Router(config-if)#exit

Router(config)#interface FastEthernet0/0

Router(config-if)#ip address 172.16.1.0 255.255.255.0

Bad mask /24 for address 172.16.1.0

Router(config-if)#no ip address

Router(config-if)#ip address 172.16.1.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#

Router(config-if)#exit

Router(config)#ip route 192.168.2.0 255.255.255.0 192.168.1.2

Router(config)#ip route 172.16.3.0 255.255.255.0 172.16.2.3

5. Mengisi IP di ROUTER1 dan juga static route nya

ROUTER1

Router>enable

Router#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#interface Serial0/0/0

Router(config-if)#ip address 172.16.2.3 255.255.0.0

Router(config-if)#ip address 172.16.2.3 255.255.255.0

Router(config-if)#

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up

no shutdown

Router(config-if)#

Router(config-if)#exit

Router(config)#interface FastEthernet0/0

Router(config-if)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up

ip address 172.16.3.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#

Router(config-if)#exit

Router(config)#ip route 172.16.1.0 255.255.255.0 172.16.2.2

Router(config)#ip route 192.168.2.0 255.255.255.0 172.16.2.2

6. Mengisi IP di ROUTER2 dan static route nya

ROUTER2

Router>enable

Router#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#

Router(config)#interface Serial0/0/0

Router(config-if)#no shutdown

Router(config-if)#

Router(config-if)#exit

Router(config)#interface Serial0/0/0

Router(config-if)#ip address 192.168.1.2 255.255.255.0

Router(config-if)#

Router(config-if)#exit

Router(config)#interface FastEthernet0/0

Router(config-if)#ip address 192.168.2.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#

Router(config-if)#exit

Router(config)#

Router(config)#ip route 172.16.1.0 255.255.255.0 192.168.1.3

Router(config)#ip route 172.16.3.0 255.255.255.0 192.168.1.3

7. Dan hasil outputnya